ELECTROCOMPANIET ECM 2 - Technical Specifications

31
ENG
Technical specifications ECM 2
The following technical data were measured on randomized test objects and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
No. of balanced analog outputs......................................................................................2
No. of unbalanced analog outputs...................................................................................2
Output Impedance............................................................................................300 Ohms
Noise floor (20 - 20 kHz)...................................................................................< -145 dB
Frequency response.......................................................................................0.5 - 48 kHz
THD+N.........................................................................................................< 0,0005 %
Upsampling rate.......................................................................................192 kHz, 24 bit
Digital/Analog conversion.........................................................................192 kHz, 24 bit
Supported audio formats........................................................All popular formats, including:
WAV/WAVE, MP3, AAC+, Vorbis, AC3, DTS, ALAC, FLAC, APE, WMA, up to 192kHz/24bit,
DSD, up to DSD128 (5.6MHz)
Supported video formats........................................................ All popular formats, including:
MPEG-2, MPEG-4, H.263, MPEG-4 AVC (H.264), up to 1080p with HD 192kHz/24bit audio
Video: 1xHDMI...........................................................................................Full HD 1080p
Digital inputs: 2x COAX/ 2x TOSlink..........................................................192 kHz, 24 bit
Network connection.......................................................................................Wi-Fi or LAN
Internet-based sources:.....................................................................YouTube, Internet Radio
Supported control interfaces: DLNA, UPnP, Android and iOS remote
Internal storage: docking, self installation
Playback method: memory-based with large buffer, asynchronous, gapless
Trigger low signal................................................................................................<1V (AC or DC)
Trigger high signal.............................................................................................. >8V(AC or DC)
Maximum trigger input level..................................................................................20V (AC or DC)
Trigger output level..........................................................................................................12V DC
Power consumption (no load or signal)...................................................................... 50 W
Standby.................................................................................................................0.5 W
Dimensions
Width ...........................................................................................465 mm / 18.3 inches
Depth ............................................................................................371 mm / 14.6 inches
Height ..................................................................................................78 mm / 3 inches
Weight..................................................................................................8.5 kg. / 18.7 lbs
*The manufacturer reserves the right to alter these specifications without further notice.