This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
5
TURNING ON THE DEVICE
1. Press and hold the On/Off button for 3 seconds the Red LED illuminates (device is powered up).
2. Wait 5 seconds for complete bootup and you are now in standby mode.
TURNING OFF THE DEVICE
1. Press and hold the On/Off button for 3 seconds to turn the device Off.
NOTE: The device will automatically turn off if you do not use it for more than 20 seconds.
RECORDING A VIDEO
To start recording a video, follow the steps below:
1. Turn on the device then press and hold the “RECORD/STOP” (camera icon) button for 4 seconds
to start recording.
2. The blue LED light will be blinking while in recording mode. The lights can be seen in your
peripheral vision while wearing the glasses. So you’ll know when recording.
NOTE: To take a simple photo, just press the “RECORD/STOP” once without holding.
TO STOP A RECORDING
1. Press once the “RECORD/STOP” (camera icon) button.
2. Once you stop recording the device will automatically save the file the memory card. Please give
the device a couple seconds to save the file before trying to record again or power off.
3. Once the blinking blue LED light stops that would mean that the device is back in standby mode
and is ready to record another video or be powered off.
NOTE: The device will automatically turn off if you do not use it for more than 20 seconds.
VIDEO PLAYBACK
You can download and view videos through your computer in two ways with the days – USB Connection
and through the Memory Card.
Device Connected via USB
1. Turn on the device.
2. Connect the device to the USB port of your computer using the USB cable that came with
the package. The device will be recognized as an external storage device of the computer
which will be labeled either D:, E: or F: under My Computer.
3. Open the storage drive pertaining to your device then drag the video clips and drop them
to your desktop (or whichever location you prefer to save the files). You can also do copy
To Next Page
Loading...