electroil Archimede IMMP1.1W - User Manual

Inverter with Blue Connect radio communication
system
IMMP1.1W – IMMP1.5W
Single-phase Inverter for single-phase motor pump
IMMP1.5W-BC
Single-Phase Inverters for Single-phase motor pump
with Blue Connect system
IMTP1.5W
Single-phase Inverter for three-phase motor pump
IMTP1.5W-BC
Single-phase Inverter for three-phase motor pump with Blue Connect system
ITTP1.5W-BC
Three-phase Inverter for three-phase motor pump with Blue Connect system
Operation and maintenance handbook
ENG
EC.086.222

Summary

Specifications

Working Conditions

Warnings and Risks

Assembling and Installing

4.1 Wall Inverter Fixing in Vertical Position

Instructions for vertically mounting the inverter on a wall for optimal cooling.

4.2 Electric and Hydraulic Connections

Guide for connecting the inverter to power supply, pump, and pressure transducer.

4.2.1 Connecting the Pressure Transducer to New Waterworks System

Details on how to connect the pressure transducer to a new waterworks system.

4.2.2 Connecting the Pressure Transducer to Old Waterworks System

Details on how to connect the pressure transducer to an old waterworks system.

4.2.3 Membrane Tank

Guidance on using a membrane tank for optimal pressure control.

4.3 Inverter - Pump Connection

How to connect the inverter to single-phase and three-phase pumps.

4.4 Inverter Electric Connection to Line

Connecting the inverter to the mains power supply and associated safety rules.

4.5 Access to the Electronic Board

Procedures for safely accessing the inverter's electronic board for maintenance.

4.6 Connecting Float Contact or NC Contact

How to connect external float switches or normally closed contacts for pump control.

4.7 Electronic Board Connections

Diagrams and instructions for connecting various components to the electronic board.

Starting and Programming

5.1 Programming

Step-by-step guide for initial pump setup, self-regulation, and basic operation.

5.1.1 Checking Pump Stop for Minimum Flow

Procedure to verify the pump's automatic stop at minimum flow conditions.

5.1.2 Checking Pump Stop for Dry Run Situation

Procedure to verify the pump's automatic stop during dry run conditions.

5.1.3 Group Functioning of Archimede Blue Connect

Configuring multiple Blue Connect inverters to operate as a group.

5.2 Advanced Regulations and Control Panel Visualization

Overview of advanced functions and parameters for fine-tuning inverter operation.

Protections and Alarms

Solution on Common Installation and Working Problems

Guarantee

Declaration of Conformity

electroil Archimede IMMP1.1W Specifications

General

Brand	electroil
Model	Archimede IMMP1.1W
Category	Inverter
Language	English