EasyManua.ls Logo

Electroline ELNEXTESPRESSO373BTR - Page 55

Electroline ELNEXTESPRESSO373BTR
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
6
7
8
coffee machine to start heating .
At this time, the power switch indicator light is
always on, indicating that the heating is com-
pleted. Press the coffee button switch to brew
two cups of coffee (about 60 ml). Press the
coffee key switch again, then turn off the water
pump and wait 5 seconds.
Press the steam switch button, the steam
switch indicator light will flash, wait until the
steam switch indicator light stays on. Turn the
steam control knob to generate steam for 2
minutes, then turn the steam control knob to
the " o " position to stop generating steam.
Press the power switch to stop working and
allow the descaling agent to accumulate in the
machine for at least 15 minutes.
When restarting the device, you need to repeat
the above steps from point 4 to point 6 more
than 3 times.
Then press the power button, the power switch
light is always on, and then pressthe coffee
brewing button until there is no more descal-
ing agent.
EN
ELNEXTESPRESSO373BTR
Espresso Coffee Machine
Use and maintenance manual
- 18