487 03 29 91
1.1
Machine presentation
1
Service
manual
General
The extractors described in this manual, with drum volumes 38, 58 and 88 litres,
are an invaluable complement to the washing machine and other drying equipment.
Through their efficient extraction of the water from the load after a wash program,
the drying time can be considerably reduced. Drying wash in a drying cabinet or
tumble dryer is energy-intensive and an efficient extractor can save a great deal of
energy every year.
The machines are available in two types:
• Flexibly-mounted type (38 and 58 litre drum volumes). The drum is mounted
flexibly in relation to the frame. As a result, a minimum of vibration is transferred
to the frame, and this in turn makes installation easier. These extractors can
generally be installed using expanding bolts (size M12) directly on a cast
concrete floor of good quality and sufficient thickness.
• R-model (38,58 and 88 litre drum volumes). The drum is relatively rigidly
mounted in the frame. The floor must be very stable to take up the dynamic
forces from extraction. The mounting bolts must be cast inti the floor.
The extractor is controlled by means of three buttons on a control panel. The
buttons have the following functions:
Start Starts the extractor. It will run for 5 minutes (factory settings) and then switch
off automatically.
Stop Is used to stop extraction before the set time has elapsed.
Opens the lid when the drum has stopped after the set time has
elapsed, if extraction has been interrupted using the stop button,
if the extractor has stopped because of load imbalance, or if it has
been energised with the lid closed.
1
Service door
Lid
1
To Next Page
Loading...
Need help?
General
