Do you have a question about the Electrolux CAL61.206 and is the answer not in the manual?
Read carefully; unit must be serviced by authorized personnel.
Modifications are hazardous and could lead to serious injury or death.
Ensure safety by disconnecting all power supplies before cutting.
Guidelines for routing power supply with proper sizing and fusing.
Warning against sliding the unit to avoid gasket damage and improper sealing.
Torquing mounting bolts to ensure a secure fit and water seal without damage.
Emphasizes turning off power before making electrical connections to prevent shock.
Details connecting power supply wires (red, black, green) to the terminal block.
Instructions for setting thermostat and selector switch for cooling modes.
Initial checks for power supply issues when the unit fails to operate.
Read carefully; unit must be serviced by authorized personnel.
Modifications are hazardous and could lead to serious injury or death.
Ensure safety by disconnecting all power supplies before cutting.
Guidelines for routing power supply with proper sizing and fusing.
Warning against sliding the unit to avoid gasket damage and improper sealing.
Torquing mounting bolts to ensure a secure fit and water seal without damage.
Emphasizes turning off power before making electrical connections to prevent shock.
Details connecting power supply wires (red, black, green) to the terminal block.
Instructions for setting thermostat and selector switch for cooling modes.
Initial checks for power supply issues when the unit fails to operate.
| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Heating Capacity | Unknown |
| Air Flow (Indoor Unit) | Unknown |












Loading...