8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Food Sensor
Food Sensor - measures the temperature
inside the food. When the food is at the set
temperature, the oven turns off.
Set 2 temperatures:
• the oven temperature: minimum 120 °C,
• the food core temperature.
For the best cooking results:
• Ingredients should be at the room
temperature.
• Food Sensor - do not use it with liquid
dishes.
• Food Sensor - during cooking it must
remain in the dish.
Food categories: meat, poultry and
fish
1. Insert the tip of the core temperature
sensor into the centre of meat or fish, in
the thickest part if possible. Make sure
that at least 3/4 of the core temperature
sensor is inside of the dish.
2. Put the plug of the core temperature
sensor into the socket located in the front
frame of the appliance.
The indicator for the core temperature sensor
flashes.
3. Press the button or to set the core
temperature. You can set the temperature
from 30 °C to 99 °C.
4. Set the oven function and temperature.
When the dish is at the set core temperature,
an acoustic signal sounds for 2 minutes.
Press any button to stop the signal.
5. Deactivate the appliance.
6. Remove the plug of the core temperature
sensor from the socket. Remove the dish
from the appliance.
If the dish is not cooked to your satisfaction,
do the above steps again and set a higher
core temperature.
You can change the temperature at any time
during the cooking. Press to change the
set core temperature.
WARNING!
Be careful when you remove the tip and
plug of the core temperature sensor. The
core temperature sensor is hot. There is
a risk of burns.
Food category: casserole
1. Place half of the ingredients in a baking
dish.
2. Insert the tip of the core temperature
sensor exactly in the centre of the
casserole. The core temperature sensor
should be stabilized in one place during
baking. Use a solid ingredient to achieve
that. Use the rim of the baking dish to
support the silicone handle of the core
temperature sensor. The tip of the core
temperature sensor should not touch the
bottom of a baking dish.
3. Cover the core temperature sensor with
the remaining ingredients.
4. Put the plug of the core temperature
sensor into the socket located in the front
48 ENGLISH
To Next Page
Loading...
