6
Control Knobs
The cooking power can be set anywhere between
level 1 and 9.
Residual heat indicator
The residual heat indicator lights up, as soon as one
cooking zone is hot.
1 Caution Risk of burns from residual heat. After
being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator.
2 Residual heat can be used for melting and
keeping food warm.
Operating the appliance
3
When a cooking zone is switched on, it may
hum briefly. This is a characteristic of all ce-
ramic glass cooking zones and does not im-
pair either the function or the life of the
appliance.
Selecting the heat setting
1. When boiling water/searing food, select a high
heat setting.
2. As soon as steam forms or the fat or oil is hot, set a
lower heat setting.
3. To end the cooking process, turn to the Off posi-
tion.
1 lowest power
9 highest power
0 Off position
Heat setting Ring control knob Knob setting
To increase
turn clockwise
1 - 9
To reduc e
turn anti-clockwise
9 - 1
switch off 0
To Next Page
Loading...
