11.2 Using Child Lock
The Child Lock prevents an accidental
operation of the oven.
When the pyrolytic cleaning is
turned on, the door is locked.
When you press a sensor field
the display shows the message.
1. Press and hold for 3 sec to turn off the
oven.
2. Press and hold
and at the same
time for 2 sec.
The signal sounds.
The display shows SAFE. The door is
locked.
To turn off the Child Lock function repeat
step 2.
11.3 Using the Function Lock
You can turn on the function only when the
oven works.
The Function Lock prevents an accidental
change of the oven function.
1. To turn on the function turn on the oven.
2. Turn on an oven function or setting.
3. Touch and hold and at the same
time for 2 seconds.
A signal sounds.
Lock comes on in the display.
To turn off the Function Lock repeat step 3.
If the Pyrolysis function works,
the door is locked. A message
comes on in the display when
you touch a sensor field.
You can turn off the oven when
the Function Lock is on. When
you turn off the oven, the
Function Lock turns off.
11.4 Using the settings menu
The settings menu lets you turn on or turn off
functions in the main menu. The display
shows SET and the number of the setting.
Description Value to set
1 RESIDUAL HEAT INDICATOR ON / OFF
2 CLEANING REMINDER ON / OFF
3
KEY TONE
1)
CLICK / BEEP / OFF
4 FAULTY TONE ON / OFF
5 DEMO MODE Activation code: 2468
6 SERVICE MENU -
7 RESTORE SETTINGS YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold for 3 seconds.
The display shows SET1 and "1" flashes.
2. Press or to set the setting.
3. Press .
4. Press
or to change the value of
the setting.
5. Press .
To exit the Settings menu, press or press
and hold .
11.5 Automatic switch-off
For safety reasons the oven turns off after
some time, if a heating function works and
you do not change any settings.
20 ENGLISH
To Next Page
Loading...
