Clock function Application
Duration To set how long the oven works.
End Time To set when the oven turns off.
Time Delay To combine Duration and End Time function.
Minute Minder To set a countdown time. This function has no effect on the operation
of the oven. You can set the Minute Minder at any time and also when
the oven is off.
00:00 Count Up Timer To set the count up, which shows how long the oven works. It is on im‐
mediately when the oven starts to heat. The Count Up Timer is not
turned on if Duration and End Time are set. This function has no effect
on the operation of the oven.
8.2 How to set: Time of Day
After the first connection to the mains, wait
until the display shows and 12:00. "12"
flashes.
1. Press or to set the hours.
2. Press
.
3. Press or to set the minutes.
4. Press .
The display shows the new time.
To change the time of day press again
and again until starts to flash.
8.3 How to set: Duration
1. Set a heating function and temperature.
2. Press again and again until starts
to flash.
3. Press or to set the minutes for
Duration.
4. Press or the Duration starts
automatically after 5 seconds.
5. Press
or to set the hours for
Duration.
6. Press or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal sounds
for 2 minutes. The display shows flashing
and time setting. The oven turns off.
7. Press a sensor field to stop the signal.
8. Turn off the oven.
8.4 How to set: End Time
1. Set a heating function and temperature.
2. Press again and again until starts
to flash.
3. Press or to set the End Time and
press . First you set the minutes and
then the hours.
When the set time ends, the signal sounds
for 2 minutes. The display shows flashing
and the time setting . The oven turns off
automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
8.5 How to set: Time Delay
1. Set a heating function and temperature.
2. Press again and again until starts
to flash.
3. Press or to setthe minutes for
Duration.
4. Press
.
5. Press or to set the hours for
Duration.
6. Press .
The display shows flashing .
7. Press
or to set the End Time and
press . First you set the minutes and
then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at the set
End Time. When the set time ends, the
14 ENGLISH
To Next Page
Loading...
