signal sounds for 2 minutes. The display
shows flashing and the time setting . The
oven turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function is
turned on, the display shows a
symbol of the heating function,
with a dot and . The dot
shows which clock function is on
in the Clock / residual heat
display.
8.6 How to set: Minute Minder
1. Press .
The display shows flashing and "00".
2. Press to switch between options. First
you set the seconds, then the minutes
and the hours.
3. Press or to set the Minute Minder
and to confirm.
4. Press or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal sounds
for 2 minutes and the display shows flashing
00:00 and
.
5. Press a sensor field to stop the signal.
8.7 How to set: Count Up Timer
1. To reset the Count Up Timer press:
and at the same time .
2. When the display shows "00:00" the
Count Up Timer starts to count up again.
9. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
There are 9 automatic programmes. Use an
automatic programme or recipe when you do
not have the knowledge or experience on
how to prepare a dish. The display shows the
default cooking times for all automatic
programmes.
9.1 List of automatic programmes
Programme
1 ROAST BEEF
2 ROAST PORK
3 CHICKEN, WHOLE
4 PIZZA
5 MUFFINS
6 QUICHE LORRAINE
7 WHITE BREAD
8 POTATO GRATIN
Programme
9 LASAGNE
9.2 How to use: automatic
programmes
1. Activate the appliance.
2. Touch .
The display shows the number of the
automatic programme (1 – 9).
3. Touch or to choose the automatic
programme.
4. Touch or wait five seconds until the
appliance automatically starts to work.
5. When the set time ends, an acoustic
signal sounds for two minutes. The
symbol flashes.
6. Touch a sensor field or open the oven
door to stop the acoustic signal.
7. Deactivate the appliance.
ENGLISH 15
To Next Page
Loading...
