User manual
11
Activate/deactivate the child safety lock
Press and hold the stop button and the butterfly button at the same time until both of the lamps are flashing. The
flashing lamps indicate activation or deactivation of the child safety lock.
fig.W01234
5.5 Overheat protection
The drying cabinet is equipped with an overheat protection function that is reset automatically.
When the overheat protection has been activated, the drying cabinet will not be able to start.
Once the temperature inside the drying cabinet has returned to normal (this can take up to 10–15 minutes), the dry-
ing cabinet can be started again.
Before starting, make sure that the filter is clean. If the filter is not clogged and the cabinet stops, you can remove
some of the laundry.
If none of these measures helps and it is still not possible to switch on the drying cabinet, contact a supplier or service
personnel.
To Next Page
Loading...
