The Doors
GEEING THROUGHNARROWSPACES
m m m m m m m m m m m m m m m m m m m m m
If your refrigerator will not fit through an entrance area, you can reduce its size by
removing the doors. Check first by measuring the entrance.
RequiredTools
You will need the following tools:
Tools Necessary:
AND OR
Socket 3/8" Fixed
Wrench Set Wrench
Topreparefor removingthe doors:
1 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille (as explained in the Installation
Instructions that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
To Next Page
Loading...
