Electrolux E30MO65GSSB - Page 43

Troubleshooting and Testing
3-19
33
34
35
36
37
38-40
41
42
43
44
45
46
47
P27
P26
P25
P24
P23
P22-
P20
P17
P16
P15
P14
P13
P12
P11
IN
IN
IN
IN
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
OUT
Signal coming from touch key.
When any one of G-1 line keys on key matrix is touched, a corresponding signal from
P10 - P17 will be input into P27. When no key is touched, the signal is held at “L” level.
Signal similar to P27.
When any one of G-2 line key on key matrix is touched, a corresponding signal will
be input into P26.
Signal similar to P27.
When any one of G-3 line key on key matrix is touched, a corresponding signal will
be input into P25.
Signal similar to P27.
When any one of G-4 line key on key matrix is touched, a corresponding signal will
be input into P24.
Segment data signals.
The relation between signals and indicators are as follows:
Segment data signal.
Signal similar to P23.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-12 line keys on key matrix is touched.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-11 line keys on key matrix is touched.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-10 line keys on key matrix is touched.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-9 line keys on key matrix is touched.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-8 line keys on key matrix is touched.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-7 line keys on key matrix is touched.
Segment data signal. Signal similar to P23.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P24-P27 terminal while
one of G-6 line keys on key matrix is touched.
Pin# Signal I/O Description