Electrolux EA2F6840CF - Options

Programme
Universal
powder
1)
Liquid Uni‐
versal
Liquid for
coloureds
Delicates
woollens
Special
Anti-Alergia
▲ ▲ -- -- ▲
Edred. -- -- -- ▲ ▲
Sport -- ▲ ▲ -- ▲
Lana\Lãs/Seda
-- -- -- ▲ ▲
1)
At temperature higher than 60 °C the use of powder detergent is recommended.
▲ = Recommended -- = Not recommended
9. OPTIONS
9.1 Temp.ºC
Set this option to change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature
comes on.
9.2 Centrif.
With this option you can change the
default spin speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
• Set this option to deactivate all spin
phases. Only the drain phase is
available.
• The related indicator comes on.
• Set this option for very delicate
fabrics.
• The rinses phase uses more water for
some washing programmes.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent
the laundry creases.
• The door stays locked. You must
drain the water to unlock the door.
To drain the water refer to
‘At the end of the
programme’.
9.3 Pre-Lava.
With this option you can add a prewash
phase to a washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash
phase before the washing phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
This option can increase the
programme duration.
9.4 Inicio Diferido
With this option you can delay the start of
a programme to a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases from
30 minutes to 20 hours.
The display shows the indicator
and
the selected delay time. After touching
the Inicio/Pausa
button, the
appliance begins the countdown and the
door is locked.
ENGLISH 17