Electrolux EA2F6840CF - Consumption Values

14.9 Cleaning the inlet hose and the valve filter
1
2
3
45°
20°
14.10 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
0° C, remove the remaining water from
the inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in
a container and let the water flow out
of the hose.
WARNING!
Make sure that the
temperature is higher than
0 °C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
15. CONSUMPTION VALUES
15.1 Introduction
See the web link www.theenergylabel.eu for
detailed information about Energy Label.
www.electrolux.com28