Electrolux EBE5307SA-R - Connection Kit; Single Cabinet Dimensions

2 electrolux.com.au
CONNECTION KIT
This connection kit is designed for use on the following top mount, bottom mount and single door
refrigerators and freezers whose total body height is 1725 mm.
The model numbers and overall dimensions of individual products are:
max
door
height
cabinet
height
total
height
door
width
cabinet
width
total
depth
cabinet
depth
depth
door
open
model description (H) (H1) (H2) (W) (W1) (D) (D1) (D2)
ETE4607SA-R 460 lt Top-Mount, RH Door 1725 1705 1725 699 693 773 641 1360
ETE4607SA-L 460 lt Top-Mount, LH Door 1725 1705 1725 699 693 773 641 1360
ETE5407SA-R 540 lt Top-Mount, RH Door 1725 1705 1725 796 790 773 641 1457
ETE5407SA-L 540 lt Top-Mount, RH Door 1725 1705 1725 796 790 773 641 1457
EBE4507SA-R 450 lt Bottom-Mount, RH Door 1725 1705 1725 699 693 773 641 1360
EBE4507SA-L 450 lt Bottom-Mount, LH Door 1725 1705 1725 699 693 773 641 1360
EBE5307SA-R 530 lt Bottom-Mount, RH Door 1725 1705 1725 796 790 773 641 1457
EBE5307SA-L 530 lt Bottom-Mount, LH Door 1725 1705 1725 796 790 773 641 1457
EBE5367SA-R
530 lt Bottom-Mount, RH Door 1725 1705 1725 796 790 773 641 1457
ERE5047SA-R 500 lt Single Door, Refrigerator 1725 1705 1725 699 693 773 641 1360
EFE4227SA-L 420 lt Single Door, Freezer LH 1725 1705 1725 699 693 773 641 1360
All measurements are in millimetres.
SINGLE CABINET DIMENSIONS
22mm
H2 H1
W
H
Please note:
Doors are designed
to sit proud of
cabinetry (not flush).
50mm
30mm
30mm
CABINET
DOOR
Minimum
recommended
airspace
Minimum Recommended Airspaces
If you do not have a
cupboard with a rear
gap, the recommended
clearance area on top
increases from 50mm to
90mm (x) and from
32mm to 72mm (y).
When positioned
in a corner area,
spacing of at
least 400mm on
the hinge side
will allow the
doors to open
enough to
enable the
removal of bins
and shelves.
Front face
of bench
aligned to
front corner
edge of
cabinet.
400mm
D1
D2
W1
W
D
90°
(x)
(y)
(Rear gap)
Please note:
Doors are designed
to sit proud of
cabinetry (not flush).
50mm
30mm
30mm
CABINET
DOOR
Minimum
recommended
airspace
Minimum Recommended Airspaces
If you do not have a
cupboard with a rear
gap, the recommended
clearance area on top
increases from 50mm to
90mm (x) and from
32mm to 72mm (y).
When positioned
in a corner area,
spacing of at
least 400mm on
the hinge side
will allow the
doors to open
enough to
enable the
removal of bins
and shelves.
Front face
of bench
aligned to
front corner
edge of
cabinet.
400mm
D1
D2
W1
W
D
90°
(x)
(y)
(Rear gap)
Please note:
Doors are designed
to sit proud of
cabinetry (not flush).
50mm
30mm
30mm
CABINET
DOOR
Minimum
recommended
airspace
Minimum Recommended Airspaces
If you do not have a
cupboard with a rear
gap, the recommended
clearance area on top
increases from 50mm to
90mm (x) and from
32mm to 72mm (y).
When positioned
in a corner area,
spacing of at
least 400mm on
the hinge side
will allow the
doors to open
enough to
enable the
removal of bins
and shelves.
Front face
of bench
aligned to
front corner
edge of
cabinet.
400mm
D1
D2
W1
W
D
90°
(x)
(y)
(Rear gap)
50mm
30mm
30mm
CABINET
DOOR
Minimum
recommended
airspace
Please note:
Doors are designed
to sit proud of
cabinetry (not flush).
50mm
30mm
CABINET
DOOR
Minimum
recommended
airspace
Wa
63mm
Wb
H
H1
D1
D