19
Heating accelerator function
This function allows you to bring the cooking zone to
the selected power level more quickly than when
selecting the power level.
To activate the Heating accelerator function (the
example shows the front left cooking zone at level 3):
1. Press and hold a cooktop knob.
2. Keep the knob pressed and turn it
counterclockwise to position or
until the symbol appears on the
corresponding cooking zone display (a beep
will be emitted).
3. Keep the knob pressed and select the required
power level within 3 seconds. The
corresponding cooking zone display will show
and the selected power level number
alternating.
You can increase the power level at any time. The
“acceleration” time frame will be modified
automatically.
To deactivate the Heating acceleration function, sim-
ply bring the knob to the OFF position or select a
lower power level.
Bridge function
The bridge function allows you to control two cooking
zones simultaneously. This function is useful when
cooking with oblong cookware such as roasting pans
or fish kettles, or when cooking with two pans at the
same time.
To activate the Bridge function:
1. Press and hold turn the front / rear left knobs
counterclockwise to the positions (a
short beep will be emitted):
2. Release the knobs.
IMPORTANT
Once the selected power level is reached, the Heat-
ing accelerator function will be deactivated (the
symbol will disappear) and the power level will
remain the selected one.
IMPORTANT
• This function is only available for front and rear
left zones (1 - 2). All the other zone combina-
tions are not allowed.
• With the bridge function activated, is it not pos-
sible to activate Boost mode.
USING THE COOKTOP
To Next Page
Loading...
