To Next PageTo Next PageWhy is my Electrolux ECH/AT-1500 3AI-W EEC not heating?
If your Electrolux Heater isn't heating, first, ensure it's properly connected to a power supply. If it is, check whether the convector is in standby mode and set it to operating mode. Also, the room temperature might be higher than the thermostat setting, so adjust the temperature accordingly.
General welcome and usage instructions.
Crucial safety precautions to prevent injury or damage.
Overview of the product's physical components.
Details of the device's control interface.
Explains symbols used on the device screen.
Steps to power on the appliance.
Describes temperature settings and modes.
Instructions for setting weekly heating schedules.
Explanation of the automatic safety feature.
How to mount the heater on a wall.
Steps for setting up the heater on the floor.
Recommendations for cleaning and upkeep.
Solutions for common malfunctions.
Technical details and data of the appliance.
Details of the product warranty.
Information on when the product was made.
Contact details and origin of the product.
General welcome and usage instructions.
Crucial safety precautions to prevent injury or damage.
Overview of the product's physical components.
Details of the device's control interface.
Explains symbols used on the device screen.
Steps to power on the appliance.
Describes temperature settings and modes.
Instructions for setting weekly heating schedules.
Explanation of the automatic safety feature.
How to mount the heater on a wall.
Steps for setting up the heater on the floor.
Recommendations for cleaning and upkeep.
Solutions for common malfunctions.
Technical details and data of the appliance.
Details of the product warranty.
Information on when the product was made.
Contact details and origin of the product.
General| Brand | Electrolux |
|---|---|
| Model | ECH/AT-1500 3AI-W EEC |
| Category | Heater |
| Language | English |
