To Next PageTo Next PageWhy is my Electrolux Heater not heating?
If your Electrolux Heater isn't heating, first, ensure it's properly connected to a power supply. If it is, check whether the convector is in standby mode and set it to operating mode. Also, the room temperature might be higher than the thermostat setting, so adjust the temperature accordingly.
Why is my Electrolux Electric Heater not heating?
If your Electrolux Electric Heater isn't heating, first ensure it's properly connected to a power supply. If it is, check if the convector is in standby mode and, if so, set it to operating mode. Also, make sure the actual room temperature isn't higher than the thermostat setting; if it is, adjust the temperature accordingly.
General safety rules for using electrical devices to prevent electric shock, fire, and injury.
Step-by-step guide for setting weekly or custom 24-hour operating schedules.
Guidance on wall mounting and floor installation procedures and requirements.
Detailed steps for attaching the chassis for floor mounting the convector.
Comprehensive technical data including power, dimensions, weight, and protection classes for all models.
General safety rules for using electrical devices to prevent electric shock, fire, and injury.
Step-by-step guide for setting weekly or custom 24-hour operating schedules.
Guidance on wall mounting and floor installation procedures and requirements.
Detailed steps for attaching the chassis for floor mounting the convector.
Comprehensive technical data including power, dimensions, weight, and protection classes for all models.
General| Model | ECH/AT-2000 3AI-W EEC |
|---|---|
| Category | Heater |
| Power | 2000 W |
| Heating Levels | 3 |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Safety Features | Overheat protection, tip-over switch |
| Installation | Wall-mounted |
| Features | Overheat protection |
| Heating Element | Ceramic |
