Q
qtateAug 9, 2025
What to do if water goes out from the nozzle when 'Vapour refresh' cycle is selected on my Electrolux Dryer?
- HHelen JacksonAug 9, 2025
If water is coming out of the nozzle during the Vapor Refresh cycle, first, make sure the water tap is open. Next, check the inlet hose connection to ensure it is not squashed or kinked. Also, the filter in the inlet hose might be blocked, so clean it. If the nozzle is clogged, please contact the Service Centre. If you are still having problems, contact the Service Centre.