Electrolux EDW 1103 User Manual

SERVICE MANUAL
DISHWASHERS
SERVICE MODE & ALARM
CODES
Dishwashers with electronic
control system
 ELECTROLUX HOME PRODUCTS
Customer Care - EMEA
Training and Operations Support
Technical Support
Publication number
599 79 76 - 53
Edition: 05/2017 - Rev. 1.0
EN
• EDW 503
• EDW 1103
• EDW 1503
•
EDW 1753
• EDW 1953
• EDW 4013
• EDW 4033
599 79 76 - 53 REV 1.0

Electrolux EDW 1103 Specifications

General

Type	Freestanding
Energy Efficiency Class	A
Washing Performance Class	A
Drying Performance Class	A
Number of Programs	5
Delay Start	Yes
Dimensions (H x W x D)	850 x 600 x 600 mm

Summary

User Interface and Modes

Service Mode Function Descriptions

Details specific service mode functions like alarm reading, actuator tests, and functional test cycles.

EDW503 Model Specifics

EDW503 Alarm Reading and Actuator Test

Details how to read alarms and perform actuator tests on EDW503.

EDW503 LED Test and Alarm Memory Clear

Explains the process for testing LEDs and clearing alarm memory on EDW503.

EDW1503/EDW1753 Model Specifics

EDW1503/1753 Alarm Reading and Actuator Test

How to read alarms and perform actuator tests on EDW1503/EDW1753.

EDW1503/1753 LED Test and Alarm Memory Clear

Procedure for testing LEDs and clearing alarm memory on EDW1503/EDW1753.

EDW1103 Model Specifics

EDW1103 Alarm Reading and Actuator Test

How to read stored alarms and perform actuator tests on EDW1103.

EDW1103 LED Test and Alarm Memory Clear

Procedure for testing LEDs and clearing alarm memory on EDW1103.

EDW1953 Model Specifics

EDW1953 Alarm Reading and Actuator Test

How to read stored alarms and perform actuator tests on EDW1953.

EDW1953 LED Test and Alarm Memory Clear

Procedure for testing LEDs and clearing alarm memory on EDW1953.

EDW 4013/4033 Model Specifics

Alarm Codes and Descriptions

i00 Code: Low Mains Voltage

Details the i00 alarm for low mains voltage and its conditions.

i10 Code: Water Tap Closed

Describes the i10 alarm for a closed water tap and its conditions.

i11 Code: Dynamic Filling Issue

Explains the i11 alarm for dynamic filling issues and time limits.

i20 Code: Draining Problem

Details the i20 alarm for draining problems and its conditions.

i30 Code: Aqua Control Error

Describes the i30 alarm related to Aqua Control errors and its causes.

i46 Code: Pressure Sensor Calibration High

Details the i46 alarm for invalid pressure sensor calibration (signal high).

i51 Code: Asynchronous Motor Problem

Explains the i51 alarm for asynchronous motor issues and its causes.

i52 Code: WP BLDC Abnormal High Current

Details the i52 alarm for abnormal high current in WP BLDC motors.

i53 Code: WP BLDC Over Current

Describes the i53 alarm for over current in WP BLDC motors.

i54 Code: WP Motor Locked or Not Following

Explains the i54 alarm for locked rotor or non-following motor.

i59 Code: WP Current Read ADC Fault

Details the i59 alarm for faults in the WP current reading ADC.

i5A Code: Over Temperature or Overload

Explains the i5A alarm for over temperature or overload conditions.

i5B/i5H Code: WP/DP Current Plausibility

Describes the i5B/i5H alarm for current plausibility issues in WP/DP motors.

i5C Code: DP BLDC Abnormal High Current

Details the i5C alarm for abnormal high current in DP BLDC motors.

i5D Code: DP BLDC High Current SW

Explains the i5D alarm for high current in DP BLDC motors (software).

i5E Code: DP Motor Locked or Not Following

Describes the i5E alarm for DP motor locked rotor or non-following.

i5F Code: DP Motor Plug Connection

Details the i5F alarm for DP motor plug connection issues.

i61 Code: Heating Over Temperature

Explains the i61 alarm for overheating of the heating element.

i62 Code: Relay Broken

Details the i62 alarm for a broken heating element relay.

i63 Code: Heater Safety Condition Error

Describes the i63 alarm related to the heater's safety conditions.

i70 Code: NTC Sensor Out of Range

i80 Code: Auto Door Opener Malfunction

i81 Code: Auto Door Opener Warning

i82 Code: Water Reuse Valve Warning

i91 Code: MCF Checksum Error

i92 Code: CCF Checksum Error

i93 Code: UIDATA Checksum Error

i94 Code: UIDATA Version Mismatch

i95 Code: UIDATA Checksum Mismatch

iB0/iH0 Code: Turbidity Sensor Issue

iB4/iH4 Code: Turbidity Sensor Calibration Error

iCO Code: User Interface Communication

iC1 Code: MACS Bus Communication

iC2 Code: ADSI Communication

iC3 Code: Communication Between Boards

iD0 Code: No Tacho Signal

iD1 Code: Temporary No Tacho Signal

iF0 Code: Overfilling Detected

iF1 Code: High Water Level

iE0 Code: Flow Control Position Error