Programme
1)
Water (l) Energy (kWh) Duration (min)
ECO 11 0.821 240
AUTO Sense 9.6 - 13.1 0.74 - 1.06 120 - 170
Machine Care 8.9 - 10.9 0.58 - 0.70 60
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Settings Values Description
Water hardness From level 1 to lev‐
el 10 (default: 5)
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
1)
Rinse aid level From level 0 to lev‐
el 6 (default: 4)
Adjust the level of the rinse aid according
to the necessary dosage.
1)
End sound ON
OFF (default)
Activate or deactivate the acoustic signal
for the end of a programme.
1)
Auto door open ON (default)
OFF
Activate or deactivate AirDry.
1)
Key tones ON (default)
OFF
Activate or deactivate the sound of the
buttons when pressed.
Latest prog. selec‐
tion
ON
OFF (default)
Enable or disable the automatic selection
of the most recently used programme and
options.
1)
Display on floor ON (default)
OFF
Activate or deactivate TimeBeam.
1)
Brightness From level 0 to lev‐
el 9
Adjust the brightness of the display.
www.electrolux.com10
To Next Page
Loading...
