Electrolux EES200E/5503S - Brewing and Dispensing; Espresso Brewing Guide; Dispensing Hot Water

9
Preparation
Espresso
• Fillthecontainerwithwater.
• InserttheplugintoasuitablewalloutletandusetheOn/Oswitchtoturnonthe
appliance. The main indicator light and temperature indicator light will be turn on.
• Settheselectortothehot-waterposition(buttonreleased).
• Preheatthelterholderandthecup(s).
• Removethelterholder,llwithgroundcoeeandre-attachit.
• Placethecup(s)underneaththeoutlets.
• Whenthetemperatureindicatorlightturnso,turntheoperatingdialtoposition
.Theespressoisnowdeliveredstraightintothecup(s).
• Oncethecup(s)arefull,turnthevalveselectortoitsneutralpositiontoswitchthe
pump o.
• Waitforapproximately30secondsbeforedetachingthelterholderand
removing the coee grounds.
• Theespressomakerisnowreadyforanotherbrewingcycle.
Dispensing hot water
• Placeacupunderthesteamnozzle.
• Turntheoperatingdialtothe position.
• Oncethedesiredquantityofhotwaterhasbeencollected,turntheoperatingdial
to its neutral position to switch the pump off.
EN