Electrolux EFEP956 - Lock Control Panel; Child safety lock

37
Deactivating the beep sound
The beeping sound can be deactivated if required.
• First deactivate the hob.
• Then hold down
for 3 seconds. The displays will
come on and then go out. Then hold down for 3
seconds. 60 will now be displayed.
• Touch
and change display to 61. The sound will
now be off.
• When the sound is deactivated you will still hear
sounds when:
1 You touch
.
2 You put something on the control panel.
3 The timer alert comes on.
To reactivate the sound:
• First deactivate the hob.
• Then hold down
for 3 seconds. The displays will
come on and then go out. Then hold down for 3
seconds. 61 will now be displayed.
• Touch
and change display to 60. The sound will
now be on.
Lock
Use this function to prevent an accidental change of the
heat settings.
• First set the heat setting.
• To start this function touch
. The symbol will then
show on all zones for 4 seconds before reverting back
to the heat settings.
• The indicator above the lock sensor will remain on.
• Timer functions will continue to operate after the lock
is activated.
• To stop this function touch
again. Deactivating the
appliance will also stop this function.
Child safety lock
Use this function to prevent an accidental operation
of the hob.
• To activate this function, first turn the hob on by
touching the
sensor.
• Then hold down the
sensor for 2 seconds. will
then show on all zones for 4 seconds before reverting
back to the heat setting.
• Turn the hob off by touching the
sensor again and
the hob is now in a mode where the heat settings
cannot be accidentally operated.
• To unlock, first turn the hob back on by touching the
sensor, and then hold down the sensor again.
Touch again to switch off. This will bring the hob
back to normal operating mode.
USING THE INDUCTION HOB (CONTINUED)