7
3. Clean the metal inlet grille/s and motor support/
s before replacing the charcoal filter/s.
4. Place the new charcoal filter/s (B) over the motor
support/s (A), and while holding the filter securely
insert the disk (C) and turn clockwise.
This appliance can be a fire hazard if the
grease and charcoal filters are not replaced as
recommended.
Changing the Lamps
If a lamp fails to function check that the lamp is securely
screwed into the holder. To tighten the lamps turn
clockwise, but ensure not to over tighten them and bre-
ak the lens.
When changing the lamps an identical replacement must
be fitted to ensure the safe working of the cooker hood.
The replacement lamps are specified 220-240 volt 40
watt clear cylindrical shape lens with a small (E14) screw
thread.
Replacement charcoal filters, grease filters and
lamps can be obtained from your local Service Force
Centre.
To Next Page
Loading...
