Need help?Do you have a question about the Electrolux EFP6500X and is the answer not in the manual?
Attaching the hood using screws and a drilling template.
Installing the hood directly onto wall units using snap-on supports.
Installing a closing element to cover the gap between the hood and the rear wall.
Connecting the hood to the chimney with a flexible or rigid pipe.
Connecting the hood for air recirculation through a shelf outlet.
Connecting the hood to the mains supply via a two-pole switch.
Attaching the hood using screws and a drilling template.
Installing the hood directly onto wall units using snap-on supports.
Installing a closing element to cover the gap between the hood and the rear wall.
Connecting the hood to the chimney with a flexible or rigid pipe.
Connecting the hood for air recirculation through a shelf outlet.
Connecting the hood to the mains supply via a two-pole switch.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Extraction Rate | 600 m³/h |
| Number of Speeds | 3 |
| Lighting | LED |
| Material | Stainless Steel |
| Maximum extraction rate | 600 m³/h |
| Filters | Aluminium |
To Next Page
