DOC. NO. 5956.65J.00 P. 6 / 174
EFS - Dishwashing Systems Platform
Electrolux Professional
2 MANUAL ACTIVATION OF DETERGENT AND RINSE AID DISPENSERS
When replacing detergents may be necessary activate the dispensers to fill hoses.
2.1 Detergent Dispenser Activation
2.2 Rinse Aid Dispenser Activation
3 RINSE PUMP MANUAL ACTIVATION
Use this function to empty the boiler (if the dishwasher is not to be used for a long time, for maintenance oper-
ation: ex. before replacing main board).
Switch on the dishwasher.
Press and hold down CYCLE_2 and CYCLE INFINITE keys, after two
'beep' the detergent dispenser starts work for 20 sec.
Switch on the dishwasher.
Press and hold down CYCLE_1 and CYCLE INFINITE keys, after two
'beep' the rinse aid dispenser starts work for 40 sec.
Switch on the dishwasher.
Close the door and press and hold down DRAIN and CYCLE INFINITE
keys. A buzzer signal indicates the rinse pump activation and the dis-
play shows three blinking lines. Three beeps indicate the cycle end.