Door Removal & Temperature
Door Removal
If door must be removed:
Control
• Unplug the unit or switch the breaker
that supplies power to the unit to the
off position.
Remove the plastic top hinge cover.
Hold the door in place while removing
the top hinge from the cabinet.
• Remove the two 3/8"hex head bolts
from the top hinge with a 3/8"wrench
or socket.
Lift the door upwards and pull up
and away from the cabinet until free
of the bottom hinge pin mounted on
the front of the cabinet.
To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
____F-,,,,N_,,,I Hinge Cover
.........................................
' iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
1 @ _.== Hinge Bolts (2) iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
l_ _J " iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
_l,_l r-Hinge Plate iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
, ,_ / _.._..-'-'"_-.____ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
'__-I ' _-_ _=_ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
__ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
_jtt _" . iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Setting The IQ Touch TM Electronic Control
COOL DOWN PERIOD
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit
will run continuously for the first several hours.
IQ TOUCH TM ELECTRONIC CONTROL
The IQ Touch TM Electronic Control is located inside the appliance. Temperature is factory
preset to provide satisfactory food storage temperatures. However, the temperature control
is adjustable to provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP (+) key for warmer temperature and
DOWN (-) key for colder temperature on the control panel. Allow several hours for the
temperature to stabilize between adjustments. The unit can be adjusted between 33°F
(1°C) and 46°F (8°C). By pressing the TEMP MODE key, the temperature display will toggle
between °F to °C.
To turn the appliance OFF, press the UP (+) key until the warmest temperature setting of
46°F (8°C) show in the display. Then press the UP (+) key 3 times within 3 seconds to turn
the unit OFR The display will then scroll "OFF" across the display. To turn the unit back ON,
press the DOWN key 3 times within 3 seconds. The control will then display "46°F (8°C)''
and may be adjusted to the desired temperature.
To Next Page
Loading...
