The safety equipment
7
Heat the hotplates
When supplied, the hotplates have been pretreated
with an anti-corrosion product which will provide bet-
ter protection if the hotplates are heated without pans
the first time.
Heat two hotplates at a time, turning their controls
to full power, and leaving them on for no more than
five minutes. Work diagonally: heat the left front and
the right rear hotplates first, then the right front and the
left rear. The hotplates will get very hot, so be extra
mindful of the safety of anyone near the cooker during
this procedure. Some smoke and fumes are to be
expected as the remaining solvent evaporates. Do not
heat the oven empty yet. Wait until you have finished
with the hotplates.
Heat the oven empty
Children should be supervised!
The cooker will get very hot.
Before you use the oven for the first time, you need to
heat it empty. Follow these instructions:
1 Select (top/bottom heat) and maximum tem-
perature. The oven door should be shut.
2 Ventilate the room. Switch off the oven once the
“new” smell and fumes have ceased.
3 Use hot water and washing-up liquid to wipe the
oven, side racks and the inside of the door. Then
wipe all of these parts dry.
max. 5 min.
max.°C
To Next Page