EasyManua.ls Logo

Electrolux EKE6100 - Problems and actions needed; Electrical and operational faults; Performance issues and solutions; At the end of the cookers life

Electrolux EKE6100
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problems and actions needed
25
Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
At the end of the cooker’s life
1
Disconnect the cooker from the electrical supply.
2
Cut off the electrical lead, as close as possible to
the rear of the cooker.
3
Make sure that the oven door safety catch has been
deactivated, to remove the risk of children locking
themselves inside the oven.
Contact your local council to find out where you can
dispose of your cooker.
Problem Action needed
The cooker has no electrical supply
Check that:
THE
FUSE
(
S
) has not gone
THE
PLUG
is pushed in correctly
THE
RCD
(if fitted) has not tripped
The cooker will not work
Make sure the cooker function lock is not in use (see The
cooker function lock p. 14)
Boiling/frying takes a long time.
Check you have a suitable pan that conducts heat properly (see
Choice of saucepan/frying pan page 12)
The oven light is not working
Replace broken bulb (see Changing oven light bulb
page 19)
The door safety catch isn’t working
Activate the door safety catch (see The door safety catch on
page 6)

Related product manuals