EasyManua.ls Logo

Electrolux EKG511106 - Page 13

Electrolux EKG511106
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
the door do not touch the bottom of the
frame (if this happens, lift the door up again
and realign the hinges).
15
c
Finally, fold the clips back down towards the
oven (d). So that the door closes properly,
press down on the clips with something (e.g.
a screwdriver) (e). Slowly check the properly
working of the door.
d
e
Important! Never leave the door hinge
levers standing up. Otherwise the spring
action can lead to injury.
Oven bulb replacement
Warning! To avoid possibility of an
electric shock, ensure that the appliance
is switched off and disconnected from
the electricity supply before replacing
the bulb.
To replace the faulty bulb:
1. turn the glass cover anticlockwise and re-
move.
2. remove the faulty bulb and replace with a
new one.
3. refit the glass cover.
4. reconnect the appliance to the electricity
supply.
If the oven bulb needs replacing, it must
comply with the following
specifications:
Wattage: 25 W
Voltage: 230/240 V 50 Hz
Temperatures:
300
°
C
Thread Type: E 14
electrolux 13