Why is no water entering my Electrolux ELI3G6M Dishwasher?
If your Electrolux Dishwasher isn't getting water, the first thing to check is the tap. Make sure it's fully open. If the tap is open, the water inlet filter might be clogged, so try cleaning it. Also, ensure that the overflow is properly inserted, especially if your appliance doesn't have a drain pump. Finally, check that the mains pressure isn't too low.
How to fix a tank water level that is too high in my Electrolux ELI3G6M?
If the tank water level in your Electrolux Dishwasher is too high, it's likely that the waste outlet pipe or the overflow aperture is obstructed. Clear any obstructions from these areas to resolve the issue.
What to do if my Electrolux Dishwasher has inefficient drainage?
If your Electrolux Dishwasher is experiencing inefficient drainage, it might be due to an obstruction in the waste outlet pipe or the overflow aperture. Clear any blockages you find there. Also, make sure that the overflow is removed.
Covers appliance usage by people, children, packaging, guards, and labeling.
Summary table of Personal Protection Equipment (PPE) required for various machine service stages.
Basic precautions to reduce fire, electrical shock, or injury risks specific to the USA market.
Defines reasonably foreseeable improper use and identifies residual risks during operation.
Step-by-step instructions for starting the dishwasher and initial filling process.
Explains wash cycles, their use, and provides notes on the water softener system.
A guide to identifying and resolving common anomalies and issues with the dishwasher.
Lists various alarm codes, their types, possible causes, and recommended actions.
General| Category | Dishwasher |
|---|---|
| Type | Built-in |
| Size | 60 cm |
| Capacity | 13 place settings |
| Number of programs | 6 |
| Water consumption | 9.9 L |
| Delay start | Yes |
| Child lock | Yes |
| Drying system | AirDry |
To Next Page
