Why is no water entering my Electrolux ELI3CG Dishwasher?
If your Electrolux Dishwasher isn't getting water, the first thing to check is the tap. Make sure it's fully open. If the tap is open, the water inlet filter might be clogged, so try cleaning it. Also, ensure that the overflow is properly inserted, especially if your appliance doesn't have a drain pump. Finally, check that the mains pressure isn't too low.
What to do if my Electrolux ELI3CG Dishwasher has inefficient drainage?
If your Electrolux Dishwasher is experiencing inefficient drainage, it might be due to an obstruction in the waste outlet pipe or the overflow aperture. Clear any blockages you find there. Also, make sure that the overflow is removed.
How to fix a tank water level that is too high in my Electrolux ELI3CG Dishwasher?
If the tank water level in your Electrolux Dishwasher is too high, it's likely that the waste outlet pipe or the overflow aperture is obstructed. Clear any obstructions from these areas to resolve the issue.
General| Brand | Electrolux |
|---|---|
| Model | ELI3CG |
| Category | Dishwasher |
| Language | English |
Steps for starting the dishwasher and correctly loading dishes onto racks.
Details on different rack types, loading, and basic operation steps.
Explanation of wash cycles, operation, and the continuous water softener system.
Common issues, possible causes, and actions for troubleshooting.
List of alarm codes, their meaning, possible causes, and actions.
To Next Page
