What to do if my Electrolux ELM 5250 is not brewing?
If your Electrolux Coffee Maker is not brewing coffee or only brewing in drips, the coffee spout may be clogged. Try cleaning the coffee spout. Also, the circuit may not be primed, so prime the water circuit.
How to fix Electrolux ELM 5250 that won't turn on?
If your Electrolux Coffee Maker isn't turning on, make sure it's properly connected to a power source. If it still doesn't turn on, contact Electrolux customer service.
What to do if hot water/steam is not dispensed from Electrolux ELM 5250 Coffee Maker?
If hot water or steam is not being dispensed from your Electrolux Coffee Maker, the hot water/steam spout may be clogged. Clean the steam spout with a needle after unplugging the machine and closing the steam/hot water knob.
Why is my Electrolux Coffee Maker pump so noisy?
If your Electrolux Coffee Maker's pump is very noisy, both indicator lights are flashing, and there's no water flow, it could be due to no water in the tank. Fill the tank with fresh drinking water and prime the water circuit. Also, check that the water tank is positioned correctly.
Why is the milk not frothing in my Electrolux ELM 5250 Coffee Maker?
If the milk is not frothing in your Electrolux Coffee Maker, it might be due to several reasons. You may be using milk that is not suitable, so try using fresh, partially skimmed milk. The milk might also be too hot; use milk at refrigerator temperature. Finally, the hot water/steam spout could be clogged, so clean the steam spout with a needle after unplugging the machine and closing the steam/hot water knob.
Why does my Electrolux ELM 5250 Coffee Maker take so long to heat up?
If your Electrolux Coffee Maker takes a long time to heat up, it likely has limescale build-up. Descale the machine.
What to do if Electrolux Coffee Maker brews coffee too fast?
If the coffee is brewed too fast and isn't creamy with your Electrolux Coffee Maker, the capsule may have already been used. Open the lever and insert a new capsule.
Why won't the loading lever reach the brewing position on my Electrolux ELM 5250 Coffee Maker?
If the loading lever on your Electrolux Coffee Maker doesn’t reach the brewing position, the capsule may be inserted incorrectly. Empty the used capsule compartment. If that doesn't work, repeat the sequence of opening and closing the lever. If it's still not working, remove the capsule manually from the compartment after unplugging the machine.
General| Product Type | Coffee Maker |
|---|---|
| Model | ELM 5250 |
| Auto Shut-Off | Yes |
| Keep Warm Function | Yes |
| Water Level Indicator | Yes |
| Drip Stop | Yes |
| Color | Black |
| Capacity | 1.25 liters |
| Voltage | 220-240 V |
| Cord Length | 0.8 m |
| Material | Plastic |
| Filter Type | Permanent |
| Water Tank Capacity | 1.25 liters |
To Next Page