Electrolux ELM 5250 - Page 5

5
2. Steam can be used to froth milk
or to heat liquids. Press the steam
button. The light is flashing. When
steady, the machine is ready. Place
an empty container under the spout.
Turn knob to steam position for a few
seconds to purge residual water. Then
close the knob.
3. Fill 1/3 of a container with cold milk.
Immerse the steam spout into the milk
and turn the knob. Froth the milk by
swirling the container. When ready
turn the knob back. Caution: the
steam pipe is hot! Always use the
plastic handle when touching the
steam spout.
1. Preparing coee after steam. To
prepare coee, insert a capsule, close
the lever and press either the Espresso
or the Espresso lungo button (there is
a short cooling cycle before the coee
comes out).
Using hot water/Steam functions
Preparing coee after steam
EN
1. Hot water function. Place a cup under
the steam spout. Turn the knob to
steam/hot water position, and turn it
back to stop.