37
INSTALLATION
Removing Dryer Door Assembly
1. Open the door and remove screws
with #2 square bit drive. Save for
reinstallation.
2. Remove the door assembly and place
on a cloth or towel on a flat surface.
x4
1
3. Remove the decorative caps from the
front panel and save for reinstallation.
Reversing Dryer Door Assembly
1. Locate and remove the two screws
securing the latch. Save the screws
and latch for reinstallation.
2. Locate and remove the screw holding
the hinge cover. Save the screw and
cover for reinstallation.
To Next Page
Loading...
