9
INSTRUCTIONS CONTINUED
Display Microwave Grill Convection
C-1
C-2
C-3
C-4
Operation Instructions
3. Grill or Combi. Cooking
Press “Function” repeatedly, it will cycle through the programs “G”, “C-1”, “C-2”, “C-3”, and “C-4”.
Press “Start/OK/+30” to confirm your chosen program, then press “+” or “-” to set the cooking time from
0:05 to 95:00. Press “Start/OK/+30” again to start cooking.
Note: After half the grill time passes, the buzzer sounds twice. This is normal. In order to achieve even grilling
results, it is recommended that you turn the food over, close the door and then press “Start/OK/+30”.
If you do nothing, the oven will continue working as is until the cooking time has ended.
4. Convection Cooking (With preheating function)
The convection cooking function can allow you to cook food as in a traditional oven, without microwave function.
It is recommended that you should preheat the oven to the appropriate temperature before placing the food in the oven.
1) Press “Function” repeatedly until 130 degrees is displayed.
2) Press “
” or “ ” to select the desired convection temperature.
The temperature can be chosen from 130 degrees to 220 degrees.
3) Press “Start/OK/+30” to confirm the temperature.
4) Press “Start/OK/+30” to start preheating. When the preheating temperature is reached, the buzzer will sound
twice to remind you to put the food into the oven, while the preheated temperature is flashing.
5) Put the food into the oven and close the door.
Press “
” or “ ” to adjust the cooking time. (The maximum setting time is 95 minutes.)
6) Press “Start/OK/+30” key to start cooking.
Note: a. Cooking time cannot be input until the preheating temperature temperature is reached. After the set temperature
is reached the door must be opened and food put in then door closed in order to input the cooking time.
b. If there is no time input within 5 minutes, the oven will stop preheating. The buzzer sound five times and
the program will be cancelled and return to displaying the current time.
5. Convection Cooking (without preheating function)
1) Press “Function” repeatedly until 130 degrees displays.
2) Press “
” or “ ” to select the convection temperature. When convection temperature displays, it indicates convection
function. The temperature can be chosen from 130 degrees to 220 degrees.
3) Press the “Start/OK/+30” to confirm the temperature
4) Press “
” or “ ” to adjust the cooking time. (The maximum setting time is 95 minutes.)
5) Press the “Start/OK/+30” key to start cooking.
To Next Page
Loading...
