8 electrolux.com.au
INSTRUCTIONS
Operation Instructions
1. Clock Setting
When the microwave oven is powered on, the screen will display “0:00”, and the buzzer will ring once.
1) Press “Timer/Clock” twice to select clock function, the hour figures will flash.
2) Press “
” or “ ” to adjust the hour figures, the input time should be within 0--23.
3) Press “Timer/Clock”, the minute figures will flash.
4) Press “ ” or “ ” to adjust the minute figures, the input time should be within 0--59.
5) Press “Timer/Clock” to finish clock setting. “ : ” will flash, and the time will light.
Note: 1) The clock function will not work if the clock is not set.
2) During the process of clock setting, if you press “stop/clear”,
the oven will go back to the previous status automatically.
2. Microwave Cooking
Press “Function” once, the screen will display “P100 “.
Press “Function” repeatedly or press “
” or “ ” to choose the power you want,
and “P100”, “P80”, “P50”, “P30” or “P10” will display for each added press. Then press “Start/OK/+30”
to confirm, and press “ ” or “ ” to set cooking time from 0:05 to 95:00. Press “Start/OK/+30”
again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can operate the oven
with the following steps:
1) Press “Function” once, the screen displays “P100”.
2) Press “Function” once again or press “
” to choose 80% mircrowave power.
3) Press “Start/OK/+30” to confirm, and the screen displays “P 80”.
4) Press “ ” or “ ” to adjust the cooking time until the oven displays “20:00”.
5) Press “Start/OK/+30” to start cooking.
Note: The time steps when adjusting the time vary depending on the total cooking time
selected, the adjustment steps increase as the total cooking time increases as per below:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave power level settings
Order Display Microwave Power
1 P100 100%
2 P80 80%
3 P50 50%
4 P30 30%
5 P10 10%
To Next Page
Loading...
