EMS21400 EN 7
Product description
How to operate your microwave oven
Name and Function of Parts Turntable Installation
A. Control panel
B. Turntable drive shaft
C. Turntable support and roller
assembly. Place on the floor of the
oven to support the turntable
D. Glass turntable. Food in suitable
container is placed on this tray for
cooking. Do not use the oven without
the turntable
E. Viewing window. Food can be seen
through this window while cooking
F. Oven door and seal. Oven door must
always be closed during cooking and
the faces free from dirt and build up
of food
G. Latch hook
H. Grill
I. Rack
1. Ensure that the turntable drive
shaft is located into the hole in
the oven floor and engaged with
the ‘D’ shaft of the drive motor
2. Place the turntable support and
roller assembly so that it sits
concentric with the drive shaft
3. Place the glass turntable onto
the turntable support and roller
assembly and rotate gently until
it locates into the drive shaft
N.B.
• Never place the turntable upside
down.
• Turntable, support and drive
shaft must be used during
cooking.
• Food and food containers must
always be placed on the
turntable
• The turntable can rotate
clockwise or anticlockwise. This
is normal.
To Next Page
Loading...
