electrolux installation
34
Connecting the appliance to
the power supply
• The electrical outlet should be
readily accessible so that the unit
can be unplugged easily in an
emergency. Or it should be
possible to isolate the oven from
the supply by incorporating a
switch in the fixed wiring in
accordance with the wiring rules.
• The socket should not be
positioned behind the cupboard.
• The best position is above the cup-
board, see (A).
• Connect the appliance to a single
phase 240 V/50 Hz alternating
current via a correctly installed earth
socket.
• The power supply cord may only
be replaced by an electrician.
• Before installing, tie a piece of string
to the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
• When inserting the appliance into
the high-sided cupboard, DO NOT
crush the power supply cord.
• Do not immerse the power supply
cord or plug in water or any other
liquid.
Electrical connections
WARNING: THIS APPLIANCE
MUST BE EARTHED.
The manufacturer declines
any liability should this safety
measure not be observed.
If the plug that is fitted to your
appliance is not suitable for your
socket outlet, you must call a qualified
electrician to install the required socket
and wiring.
(A)
Downloaded From Microwave-Manual.com Manuals
To Next Page
Loading...
