EasyManua.ls Logo

Electrolux EN2F4842BF - Troubleshooting

Electrolux EN2F4842BF
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programme
kg kWh Litres h:mm % °C
rpm
1)
Algod. 20°
3)
20°C
8 0.400 85.0 2:55 52.00 20.0 1400
Sintéticos
40°C
3 0.650 55.0 2:00 35.00 40.0 1200
Delicados
4)
30°C
2 0.300 45.0 1:20 35.00 30.0 1200
Lana\Lãs/Seda
30°C
1,5 0.300 65.0 1:05 30.00 30.0 1200
1)
Reference indicator of the spin speed.
2)
Suitable for washing heavily soiled textiles.
3)
Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
4)
It also performs as quick washing cycle for lightly soiled laundry.
16. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
16.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).
WARNING!
Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the
Inicio/Pausa button may flash continuously:
Problem Possible solution
The appliance does
not fill with water
properly.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the inlet hose has no kinks, damages or
bends.
Make sure that the connection of the water inlet hose is
correct.
This problem may be also caused by the clogged drain cir‐
cuit. Please contact the Authorised Service Centre.
Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to 'Care and cleaning'.
www.electrolux.com30

Related product manuals