Electrolux EOB66714 - Page 30

30 electrolux
Using residual heat with
the Duration and End
Time clock functions
When the Duration and End Time
clock functions are used, the oven
switches the heating elements off, when
90% of the time set or calculated has
elapsed. The residual heat present is
used to continue the cooking process
until the time set has elapsed (3 to 20
mins.).
Duration and End Time
combined
Duration and End Time
can be used simultaneously,
if the oven is to be switched
on and off automatically at a
later time.
1. Select oven function.
2. Press key repeatedly until the
”Duration/End Time” window
appears.
3. Using the Duration function, set
the time required for cooking the
dish, e.g.: 1 hour.
4. Confirm with .
5. Using the End Time function, set
the time at which the dish is to be
ready, e.g.: 14:05.
6. Confirm with or wait 5 seconds.
7. The selected oven function is
displayed with the cooking time and
switch-off time set for a few seconds.
A message is displayed when the
programme starts.