Step 2 Fill the cavity embossment
with tap water.
The maximum capacity of
the cavity embossment is 250
ml. Do not refill the cavity em‐
bossment during cooking or
when the oven is hot.
Step 3
Set the function: .
Press: . The indicator turns on. It works only with the function: True
Fan Cooking PLUS.
Step 4 Turn the control knob for the temperature to set temperature.
Step 5 Preheat the empty oven for 10 min to create humidity.
Step 6 Put food in the oven.
Refer to "Hints and tips" chapter. Do not open the oven door during cook‐
ing.
Step 7 Turn the knob for the heating functions to the off position to turn off the
oven.
- press to turn off the oven. The indicator turns off.
Step 8 After the function ends, carefully open the door. Released humidity can
cause burns.
Step 9 Make sure that the oven is cold. Remove the remaining water from the
cavity embossment.
7.3 Heating functions
Heating
function
Application
Off position
The oven is off.
Light
To turn on the lamp.
Heating
function
Application
True Fan
Cooking /
True Fan
Cooking
PLUS / Aqua
Clean
To bake on up to three
shelf positions at the
same time and to dry
food.
Set the temperature 20
- 40 °C lower than for
Conventional Cooking.
To add humidity during
the cooking. To get the
right colour and crispy
crust during baking. To
give more juiciness dur‐
ing reheating.
Refer to "Care and
cleaning" chapter for
more information about:
Aqua Clean.
ENGLISH 11
To Next Page
Loading...
