Before the catalytic cleaning
Turn off the oven and wait until it is
cold.
Remove all accessories. Clean the oven floor and the inner
door glass with warm water, soft
cloth and mild detergent.
Clean the oven with catalytic cleaning
Step 1 Step 2 Step 3
Set the function and the oven tem‐
perature: 250 °C
Duration: 1 h
After cleaning, turn the knob for the
oven functions to the off position.
When the oven is cold, clean the
cavity with a wet soft cloth.
12.5 How to remove and install: Door
The oven door has two glass panels. You can remove the oven door and the internal glass
panel to clean it. Read the whole "Removing and installing door" instruction before you remove
the glass panels.
CAUTION!
Do not use the oven without the glass panels.
Step 1 Open the door fully and hold both hinges.
Step 2 Lift and turn the levers fully on both hinges.
Step 3 Close the oven door halfway to the first
opening position. Then lift and pull forward
and remove the door from its seat.
Step 4 Put the door on a soft cloth on a stable sur‐
face.
Step 5 Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to re‐
lease the clip seal.
20 ENGLISH
To Next Page
Loading...
