Electrolux EQE5600 - 5.2 Alert and Alarms

15EN
Error codes
Both Fridge & Freezer displays are used to
communicate problems by code.
When error codes are displayed in the numeric
display, the unit requires service attention.
"Er" shows up on Fridge display
Various error codes on Freezer display
Error code table
Communication error CE
FZ Cavity NTC T1
FZ Evaporator NTC T2
FF Cavity NTC T3
Third cavity NTC T5
FZ Ice maker NTC T8
5.2 Alert and Alarms
Door Alarm
When any of the door is left open for 2 minutes.
The alarm will sound, and all LEDs that are
currently on.
• The alarm is turned off by closing the door or
resetting the countdown by pressing any key
on the control panel.
High Temperature alert
In the event of high temperature condition,
audio alarm is played every 10 seconds until
the alert is acknowledged.
The alarm by pressing any key on the control
panel.
Display and blink “HI” in the correspondent
compartment display, whichever is in the high
temperature condition.
ECO indicator
Eco mode indicator will light up
automatically to 100% when the
fridge and freezer compartments
are set within a temperature range.
Fridge range: 4°C to 7°C
Freezer range: -18°C to -14°C
Selecting any of these mode: Quick Freeze,
Quick Chill, Fast Ice or Drinks Chill will
deactivate the Eco mode, the Eco icon will
fade.
Air Filter Alert and Reset
Air Filter alert warns user that the Air filters have
to be changed as soon as possible.
When air filter is used for 6 months since the last
filter reset, the LED "Replace" will automatically
turn ON.
Note:
1. Users could reset the filter when alert is not
visible. Play tone_Confirm once it is reset.
2. LED_air filter remains visible during sleep
mode, except when door is closed.
High Temp indicator
on Fridge display
High Temp indicator
on Freezer display