44
Electrolux 818 16 21--02/3
6. Unscrew the cover washer on top of the cabinet
and move it to the other side. R eplace the upper door
and secure the upper hinge pin.
Replace the lower door. Change the position of the
hinge pin of the lower hinge. Then secure the hinge.
7. Raise the cabinet and replace the ventilation grille.
Model ER9096
8. New handles for the other s ide may be purchased
from your dealer.
1. Unscrew the handles and keep them for possible
future use.
2. Carefully press i n the plastic plugs into the holes
on the opposite side using a drift.
3. Secure the handles. Press in the enclosed plastic
plugs into the holes to which the handles were
previously fitted.
Model ER8496
8. Switching the handle positions (when both doors
are of same size)
1. Unscrew the handles.
2. Carefully press i n the plastic plugs into the holes
on the opposite side using a drift.
3. Secure the handles on the opposite side.
4. Press i n the enclosed plastic plugs into the holes
to which the handles were previously fitted.
9. Put the cabinet in position. Check that it stands
straight. See the section "Positioning the cabinet".
6
8
8
To Next Page
Loading...
