32
Electrolux 818 16 21--02/3
Control Panel
A BCDE F G H I
ALARM SUPER ON
ON
A. Thermometer
Displays the warmest temperature inside the freezer.
B. Alarm shut-off button
Used to turn the audible alarm off.
C. Red warning lamp
Flashes when one of the alarms in the cabinet has
been triggered.
D. FAST FREEZE button
Used to switch the fast Freeze feature on and off.
E. Yellow indicator lamp
Lights when fast Freeze is operating.
F. Green indicator lamp
Lights when the freezer is operating.
G. Thermostat control
Usetoswitchonandsetthedesiredtemperaturein
the freezer.
H. Green indicator lamp
Lights when the fridge is operating.
I. Thermostat control
Usetoswitchonandsetthedesiredtemperaturein
the fridge.
Before use
GB
Position and clean the cabinet as explained in the
section "Installation".
Check that the drain hose at the rear of the cabinet
discharges into the drip tray.
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 30 minutes, or for 4 hours if it
was transported horizontally. Otherwise
the compressor may sustain damage.
This time will allow the oil sufficient
time to return to the compressor.
Using fridge
GB
To start the fridge and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control results
in the highest temperature i nside the cabinet.
MAX
The highest position of the thermostat control results
in the lowest temperature inside the cabinet.
H :
Switched off.
To Next Page
Loading...
