EasyManuals Logo

Electrolux ERC3700X User Manual

Electrolux ERC3700X
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Electrolux 818 38 48-00/4
Remove the transport supports
Remove the tape and the t ransport supports from
· the door sides
· the shelves
Remove the transport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops. Take hold of t he rear edge of the
glass shelf and pull t he shelf and transport support
forward until the shelf tilts and the transport support
can be removed. Some models are fitted with a
silencing pad under the cabinet. Do not remove this
pad.
Cleaning
Wash the inside of the cabinet using l ukewarm
water, a mild washing-up detergent and a soft cloth.
Installing the cabinet
When two appliances are placed beside each other ,
the distances enclosed in the plastic wrapping should
be glued between the appliances. As s hown in the
illustration.
Make sure that the p ower plug is not squashed or
damaged by back of the product.
· A damaged power plug may overheat and cause a
fire.
Do not place heavy articles or the pr oduct itself on
the power cord.
· there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the
power plug.
· there is a risk of electric shock or fire.
To obtain t he best performance from the cabinet,
ensure :
· the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.
· the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.
· the cabinet is level. The cabinet should not lean
against any wall. If necessary adjust the
feet using the adjustment spanner supplied.
· there is good air circulation around the cabinet
and that the air channels below and behind
the cabinet are not blocked. The ventilation
space above the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard. In this case,
the space behind the cupboard must be at least
50 mm deep.
Cabinet is placed at a location whose ambient
temperature corresponds to the climate
classification*, for which the appliance is designed.
* See on the rating plate on the inside of the
appliance.
The following table shows which ambient
temperature is correct for each climate classification.
50mm
a
)
b
)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Electrolux ERC3700X and is the answer not in the manual?

Electrolux ERC3700X Specifications

General IconGeneral
BrandElectrolux
ModelERC3700X
CategoryRefrigerator
LanguageEnglish

Related product manuals