1616
EN
IND
KR
TH
VIET
CH
TW
12
3
6
9
Cleaning the hose and air channel
Loosen the hose behind the nozzle from its upper connection. Remove any
object that can be blocking the airow in the hose or in the air channel to
the dust cup, and put the hose back.
Shake to remove excess water and leave to dry minimum 12h.
Make sure that the lter parts are completely dried before putting them
back into the cleaner.
IMPORTANT - FILTER CLEANING!
The lters must be cleaned at regular intervals to ensure a high cleaning
performance
APAC_ErgoIFU_BED_Master.indd 16 2016-05-31 11:09:52
To Next Page
Loading...
